Best Corded Drill Reviews 2017
On this page we are going to review the best corded drills that are available in the market today. Before we even start to look at those, why should you buy a corded drill instead of a cordless drill?
After all a cordless drill is more portable, can be used just about anywhere and they are pretty affordable these days. So what are benefits and advantages of using a corded drill?
This may sound obvious but just to avoid any confusion whatsoever, a corded drill is one that plugs into a power source , so that means it can only be used if a power source is available wherever you are going to be doing your work.
This is a long article, and we understand that you may not have time to read it all. So if you are in a hurry, then the best corded drill is the DEWALT DWD112 3/8" Pistol Grip with a Metal Chuck, currently available at Amazon.
This is a heavy duty, variable speed drill perfect for all drilling applications including the heavy duty ones. The image is shown below.
Corded vs Cordless Drill Option
Personally I use both a corded and cordless one, and it just depends exactly what you are looking for from your drill. The benefit of a corded drill is that once plugged into a socket, you have a never ending power supply. In other words the battery will not run out, and you do not need to worry about charging it.
Corded drills are also more powerful, and a better option for those tougher jobs.
Corded vs Cordless DrillHere we look at the pros and cons of picking either a corded drill or a cordless drill
|Requires a power source and/or an extension lead||Fully portable|
|Just need a power source and no need to ever have charged batteries or replace batteries||Always needs a charged battery and a charger.
These will need replacing and can also run out in the middle of your work
|Always have full power for any job||As the battery discharges then the power of drilling reduces|
|Higher torque and power||Good torque and power while battery lasts|
|Lighter weight as there is no battery||Heavier because of the battery|
|You just get the drill||In most brands the battery can be used to power up other tools like an impact driver, cordless screwdriver etc|
|There is always a trailing lead||No need to worry about tripping over or cutting through leads|
|Great for a lot of drilling, running wire bushes, mixing paint, using car polisher buffers etc||Working in small spaces, some odd work around the house, or working off site|
|When you need a drill, then you NEED a drill||Great for the times when you need to do a bit of drilling.|
So as you can see, each type of power drill, has their advantages and their disadvantages, and explains the reasons why I think you need both. That is especially true if you like to do your own home projects.
I have two daughters who have their own homes and gardens. When I am doing some work for them I have had to use both, just depending on what I was doing, and where I was doing it.
Also when I was working full time as a professional you encountered different situations where there was either power or no power available. The key is to be prepared for both and then you can handle anything.
So this page is about corded drills and if you would prefer you can click on this link about the best cordless drills.
Corded Drill Buyer's Guide
There are a number of features that you need to consider when it comes to buying a corded drill and we shall go through each one below. The reality is that most drills today are actually pretty good quality.
This type of drill has been around for a very long time and the manufacturers have made a ton of improvements along the way.
Price Guide for Cordless Drills
The prices for these types of drills start at around $25 and go up to about $100 depending on exactly what you are looking for. The average price of these drill types are between $35-55.
If you can afford to spend around $75 then you will get a drill that will last you for a very long time and of very high quality. In essence though, it will depend how much it is going to be used, and how much you can afford.
A typical home owner who will use this type of drill every now and then, really will not have to spend much more than $40 to get a good all-purpose drill, that can handle wood, metal and masonry with some ease.
Contractors and professionals typically buy higher end products as they just get a lot more use.
Top 10 Corded Drills By Buyer Rating
Below I have created a list of what I think are the top ten corded drills currently available in the market today. Below this table I have then done a useful buying guide for the key features that you should look out for.
Top 10 Corded Drills for Home UseThis is my list of the top 10 buyer rated corded drills available on the market today. I have included the product name, chuck size, power, buyer rating out of 100, to help you see the comparisons in one place.
Prices change constantly so I have used an average RRP price guide. Last Updated October 2017
|Name||Chuck||Power||Rating||Read My Review|
|Dewalt DWD112||3/8" keyless chuck||8.0 Amp||92%||Dewalt DWD112|
|DEWALT DWD210G||1/2" with chuck key||10.0 Amp||90%||Dewalt DWD210G|
|DEWALT DWD115K||3/8" keyless chuck||8.0 Amp||88%||DEWALT DWD115K|
|Black and Decker DR260B||3/8" keyless chuck||5.2 Amp||88%||Black and Decker DR260B|
|Porter Cable PC600D||3/8" keyless chuck||6.0 Amp||86%||Porter Cable PC600D|
|Black and Decker DR560||1/2" with chuck key||7.0 Amp||84%||Black & Decker DR560|
|Black & Decker DR260C||3/8" keyless chuck||5.2 Amp||84%||Black & Decker DR260C|
|Bosch 1006VSR||3/8" keyless chuck||6.3 Amp||80%||Bosch 1006VSR|
|Milwaukee 0240-20||3/8" keyless chuck||8.0 Amp||78%||Milwaukee 0240-20|
|Kawasaki 840176||3/8" keyless chuck||5.8 Amp||70%||Kawasaki 840176|
You can click on any of the product names above to read more reviews by buyers over at Amazon.
Features & Benefits of Corded Drills
Let's have a detailed look at what you need to know about these drills as that helps greatly in narrowing down your decision.
The chuck basically is what holds the drill bit. You want this to be very strong as otherwise drill bits slip and that is just a pain in the ass. Some chucks need a chuck key to tighten and loosen the drill bit.
Others have what is called a keyless chuck, which means there is no need for a chuck key, as you just tighten using your hand. These are of course much more convenient. That means you never have to worry about losing a chuck key which is great. If you have ever lost a chuck key, you will know what I mean. It is also so much quicker to change bits.
For tougher drilling I would always use a chuck with a key that you tighten by hand as it is less likely to slip. If you drill a lot of metal then a chuck with a key is also the better choice.
Chucks come in different sizes and the size of the chuck will determine the size of drill bit or drill attachment that you can use. The most popular is a 3/8" chuck and you can also get 1/4" and 1/2" chucks. For most users the 3/8" chuck will cater for almost every job and is the one that I would recommend.
So to summarise for most people a 3/8" keyless chuck is the one to go for for general work.
Motor Power Explained
The bigger and more powerful the motor you have the better. Again for general purposes most drills will have sufficient power for doing jobs around the home. However if you like to have that extra thrust at your finger tips then the bigger the better. It is similar to family car versus a sport's car.
These drill motors are measured in amps. There is quite a variation in these but the general range is 5-10 amps. This simply will improve both the speed and the overall performance of your drill.
Motors that use a higher current will also last longer as there is little danger of the motor burning out, or the brushes starting to wear. As a general rule of thumb the more power that you have the better.
Corded Drill Speed
Depending on what you are drilling, you should ideally drill at different speeds. Drilling through metal typically needs a higher speed than when drilling through wood. This can get really technical and could bore you silly. How hard you push the drill, the type of material you are drilling and the type of bit you are using all impact which speed you should drill at.
So to keep this simple most home owners will need a drill that can operate at 700-1,000 rpm. The only time you ever really need to change this is if you are drilling through very specialised materials. So although you do need some element of speed variation you do not need to have a wide variation.
Corded Drill - Understanding the Hammer Setting
This is measured in blows per minute (BPM) For me this should be a standard feature on every corded drill. It is primarily used for drilling through concrete, bricks, stone etc. If it didn't have this feature I just wouldn't buy it.
A big mistake made by many drill users is to permanently leave this hammer function on.Just make sure that you never do that as you should not be drilling through wood or any form of metal with a hammer function. I wish I had a dollar for every time I have seen this happen. if I had then I would be a very rich man indeed.
User Comfort & Ergonomics
Many manufacturers make a big play on this. Personally I think it is a lot of nonsense and they just like to use the word ergonomic . Any drill in my opinion should feel well balanced, and be light enough not to cause user fatigue along with a decent grip.
The things that I look for are does it come with a side handle, as that can be really useful for some drilling? I also want the option of being able to keep drilling without always having to hold the trigger down.
If it has those then I am pretty content and I tend to then ignore all the sale's waffle and blurbs. So in simple terms a side handle and a lock button for the trigger are really useful features to have.
A lot of people look for a reverse function in a drill. With a corded drill, unless you are trying to use it with a driver set, then I see little point in having this feature. I use this type of drill for drilling holes and what is the point in having a reverse on that.
Corded drills are not really designed to be used as screw drivers or impact drivers, though some can be used for that purpose. They are not really the tools for those type of jobs though, so not something I would look for myself.
So those are the main features examined and hopefully that has helped.
Best Corded Drills For Home Use
Contractors and professionals will always want to buy a real heavy duty product. This is because they will need something that will be able to withstand a whole lot of abuse.
Now for most ordinary people, they will want to buy a drill for around the home and garden. Most people will probably opt for a cordless drill as it is just a handier tool to have.
My own recommendation would be to have both a corded and cordless, if you can afford to do that. The advantages of having a corded one at home is that you don't ever need to worry about having a charged battery. The corded version will also have a lot more power for doing those tough jobs like drilling through masonry.
No 1 Choice Corded Drill for Home Use
The best corded drill for home use, is in my opinion, the Dewalt DWD112 which has a 3/8" chuck, has a metal construction and uses an 8 amp motor for great power. It is shown in the image below.
It gets really high ratings and best of all. you can normally get a good deal online, if you search around. You should be able to pick this one up for around $60-65, which is great value.
There is a short video review of this drill just below.
You get all the benefits of owning a Dewalt drill, and this is what the professionals would pick anyway.
Best Corded Drill - Cheaper Alternative
A good alternative to this is the Bosch 1006VSR 3/8-Inch Keyless Chuck Drill. This is another popular choice for many house owners and is around the same type of price point of $50. There are many people who like this brand a lot and that is why I have included it here.
There are of course plenty of choices as you can see. For most people this will come down to price in the end. It just makes common sense to always try and get the best value for money.
I am a big DEWALT fan and although these are always a bit more expensive, I love their products. For me you get the right balance between high quality and a decent price. They also offer great warranties on their products.
Video Overview of the Best Corded Drills
We have included a useful video, that offers some great buying advice, on the best cordless drills on the market. This is worth a look if you have the time.
For the most part though the choices we make on any product will always come down to the amount of money that we have available to spend. I am sure that you are like me and want to spend your money wisely.
So if you are someone who will be doing the odd job or two around the house, then there is no need to go crazy and spend a lot of money on a drill.
Black & Decker BDEDMT Matrix Drill/Driver
Mainly your choice of corded drill will usually come down to what you can afford to spend. This one is just under $32 and is hugely popular with many buyers. It has a 4 Amp motor, is lightweight and even includes an 11 point clutch so as you don't end up stripping the heads off screws.
Buyers at Amazon have left over 600 reviews on this product and they have given it a really high average rating of 4.3 out of 5 stars. You don't get those type of high ratings unless your product is good.
I want to mention what Black and Decker describe as their matrix system. This simply means that you can easily fix any of their "Matrix attachments" to this drill with ease. Now you do need to purchase these but they include an impact driver, jigsaw, sander, router, trim saw and an oscillating tool.
In my opinion this is a good quality low cost set up. It will not cost you an arm and leg and yet it functions really well. With this one you can also get into confined spaces and get the work done.
If you haven't found exactly what you are looking for then click here for more options.